Standard Sand

Standard Sand Indian Grade 1; 2 or 3  Bag of 25 Kg

Standard sand is used to assess the quality of cement, lime, pozzolana and other mineral admixture used in construction industry 

Characteristics

• Standard sand should be of quartz material
• Colour of the standard sand is light grey or whitish
• It should be free from silt
• The sand grains should be angular, but a small percentage of flaky or rounded particle is permissible

Particle Size Distribution of Standard Sand

• All the particles of standard sand fall within the size range of 2 mm to 90 micron (as mentioned in the table below)
• Particle Size Smaller than 2 mrn and greater than 1 mm    -      33'33Percent (Grade 1)
• Particle Size Smaller than 1 mm and greater than 500 microns   33'33 Percent  (Grade 2)
• Particle Size Below 500 microns but greater than 90 microns     33'33 Percent  (Grade 3)

Note : 

To check material conformity or to download NABL Accredited laboratory test report; scan the QR CODE on each bag. You will  get individual report for each bag.