Laboratory Apparatus

Leading Manufacturers, Exporters, Wholesaler, Retailer and Trader of Blaine Air Apparatus, Bulk Density Test Apparatus, J Ring Apparatus, Laboratory Vane Shear Apparatus, Proctor Compaction Apparatus, Ring and Ball Apparatus, Sand Pouring Apparatus, Shrinkage Limit Apparatus, Slump Cone Test Apparatus, U Box Test Apparatus, Vicat Needle Apparatus with Dashpot and Water Distillation Apparatus from Delhi.

INR 1,800.00 / Piece

5 Piece (MOQ)

Business Type Manufacturer, Exporter, Supplier
Country of Origin India
Application Laboratory
Automation Grade Automatic
Brand Name Rupson

Preferred Buyer From

Location Worldwide

Blaine Air Apparatus   without liquid    The apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. This is a variable flow type air permeameter.

 

Specifications : The apparatus consists one each of permeability cell 12.5mm I.D., Manometer 'U' type mounted on stand with a built in stop cock, Perforated disc, Plunger Rubber stopper, Rubber tube 30cm long. 

Read More...


Yes! I am interested


INR 6,500.00 / Piece

1 Piece (MOQ)

Business Type Manufacturer, Exporter, Supplier
Country of Origin India
Application Laboratory
Color Blue
Brand Name Rupson

Preferred Buyer From

Location Worldwide

Bulk density test apparatus as per I.S. 2386 Part IV. Determines bulk density or unit weight of aggregates.

 

Specifications: Calibrated cylindrical measures of sheet iron with handles. Consists of 3 measures one each 3 litres capacity, 15 litres capacity and 30 litres capacity. Complete with one tamping rod, round, 16mm dia and 600mm long, one end rounded.

Read More...


Yes! I am interested


INR 15,500.00 / Piece

1 Piece (MOQ)

Business Type Manufacturer, Exporter, Supplier
Country of Origin India
Brand Name Rupson
Shape Round
Usage Laboratory

Preferred Buyer From

Location Worldwide

ASTM C1611‑09, ASTM C1621/1621M‑06

The J‑ring test can be used to determine the passing ability of self‑consolidating concrete. It is applicable for laboratory use in testing different concrete mixtures for passing ability or can be used in the field as a quality control test. Passing ability refers to the ability of SCC, under its own weight (without vibration), to flow into and completely fill the spaces within an intricate framework, containing obstacles such as reinforcement bars

 

The equipment consists of rectangular section of 38 mm X 25 mm open steel ring drilled vertically with holes to accept threaded section of reinforcing bars. The bars and sections can be placed at different distance apart to simulate the congestion of reinforcement of the ring formed by vertical section.

 

Includes following accessories:

  • Abram cone having 200 mm bottom diameter, 100 mm top diameter and 300 mm height-made of Mild steel sheet of 16 swg thickness with paint
  • Base plate of 900 mm x 900 mm-made of Mild steel sheet of 16 swg thickness with paint
  • Reinforcing bars 18 mm diameter x 100 mm length
  • J ring rectangular section 38 mm *25 mm plated vertically to form a ring 300 mm diameter generally at a spacing of 48 ± 2 mm-made of mild steel circle of 25 mm thickness duly   chrome plated

Essential accessories i.e. Stop watch, Scoop etc. are not supplied and has to be arranged by the user

Read More...


Yes! I am interested


INR 14,800.00 / Piece

1 Piece (MOQ)

Business Type Manufacturer, Exporter, Supplier
Country of Origin India
Application Laboratory Use
Color Blue

Preferred Buyer From

Location Worldwide

VANE SHEAR APPRATUS (LABORATORY PURPOSE.)


Conforming to specifications and tolerance in accordance to I.S. 2720 Part XXX. Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane by means of a hand wheel, which operates a worm gear arrangement turning the upper end of a calibrated torsion spring. The vane shaft is attached through the hollow upper shaft to a resettable pointer. Which indicates the angle of torque on a dial graduated in degrees. The dial reading multiplies by spring factor gives the torque. Complete with A container and set of springs approx 2kg/cm,4 kg-cm,6 kg-cm and 8 kg-cm Complete in a polished wooden box.


 


As above but electrically operated. Rates of rotation is 1/60rpm suitable for operation on 220/230 Volts, single phase: Price Rs. 17500/-

Read More...


Yes! I am interested


Business Type Manufacturer, Exporter, Supplier
Country of Origin India
Color Blue
Finishing Coated

Preferred Buyer From

Location Worldwide

Proctor Compaction & density Apparatus: Rs.1900/-



  • Conforming To specifications and tolerance in accordance to I.S. 2720 Part VI, 10074 for light compaction consists of

  • Proctor mould 100mm internal diam x 127.3mm high having 1000cc volume, complete with collar and base plate.

  • Rammer  2.6 kg x 310mm controlled drop through guide.


 


Proctor Compaction Apparatus (MODIFIED): Rs.2400/-



  • Complete with proctor mould for heavy compaction 150mm internal diam x 127.3mm high having 2250cc volume, complete with base plate and collar.

  • Rammer 4.89 kg X 450mm controlled drop.

Read More...


Yes! I am interested


Business Type Manufacturer, Exporter, Supplier
Country of Origin India
Brand Name Rupson
Condition New
Usage Laboratory
Packaging Type Paper Box

Preferred Buyer From

Location Worldwide

Yes! I am interested


Business Type Manufacturer, Exporter, Supplier

Preferred Buyer From

Location Worldwide

Field Desity Test Apparatus Sand replacement Method (Sand Pouring method) Conforming to specifications and tolerance in accordance to I.S. 2720 Part XXVIII consists of:



  • Small sand pouring cylinder 3 litres capacity mounted above a pouring cone and separated as a shutter hole.

  • Cylindrical calibrating container internal diam 100mm and internal depth 150mm fitted with a flange 5cm wide.

  • Metal tray 30cm square and 4cm deep with a 10cm hole in center.


 


Sand replacement equipment (Sand Pouring method) 6’’ size


 


Sand replacement equipment (Sand Pouring method) 8’’ size

Read More...


Yes! I am interested


INR 600.00 / Set

10 Set (MOQ)

Business Type Manufacturer, Exporter, Supplier

Preferred Buyer From

Location Worldwide

Conforming to specifications and tolerance in accordance to I.S. 2720 Part VII


 


To determine the water content level after which any further reduction in the water content will not cause a corresponding decrease in the volume of the soil mass.


 


Consists of:



  • Porcelain evaporating dish approx 7.5cm diam

  • Shrinkage dish of  metal 45mm internal diam X 15mm high.

  • Glass cup 50 to 55mm diam X 20mm deep.

  • Perspex prong plate with three metal prong 

  • Perspex plate plain 75mm square. 

  • Spatula 20mm width and 80mm long made of stainless steel with wooden handle. Measuring cylinder 50ml graduated.

  • Wash Bottle 500 ml

  • Nicely packed in plastic container

Read More...


Yes! I am interested


INR 1,700.00 / Piece

5 Piece (MOQ)

Business Type Manufacturer, Exporter, Supplier
Country of Origin India
Material Metal
Color Blue

Preferred Buyer From

Location Worldwide

Slump cone test apparatus conforming to specifications and tolerance in accordance to I.S. 1199 and latest I.S.7320. Consists of a slump cone frustum in shape 10cm dia at top, 20cm at bottom and 30cm hight fitted with foot piece and handle, one portable base plate having cleats to accommodate cone and tamping rod 16mm diam 60cm long graduated 0-30cm in one millimeter division.

Read More...


Yes! I am interested


INR 14,900.00 / Piece

1 Piece (MOQ)

Business Type Manufacturer, Exporter, Supplier
Country of Origin India
Type Testing Apparatus

Preferred Buyer From

Location Worldwide

U box test Apparatus U Box test is used to measure the filing ability of self compacting concrete. The apparatus consists of a vessel that is divided by a middle wall into two compartments; an opening with a sliding gate is fitted between the two sections. Reinforcing bar with nominal diameter of 134 mm are installed at the gate with centre to centre spacing of 50 mm. this create a clear spacing of 35 mm between bars. The left hand section is filled with about 20 liter of concrete then the gate is lifted and the concrete flows upwards into the other section. The height of the concrete in both sections is measured.

Read More...


Yes! I am interested


INR 1,700.00 / Piece

5 Piece (MOQ)

Business Type Exporter, Supplier
Country of Origin India
Application Laboratory
Brand Name Vicat

Preferred Buyer From

Location Worldwide

Vicat needle apparatus with dashpot; is used for determining the normal consistency and setting times of cement and 'A' Class limes.


 


 


The time it takes for a cement to stiffen to a standard value after addition of water is commonly known as the set time. The test involves mixing cement with water and then measuring its resistance to penetration of a standard probe at varying intervals of time, until a certain value is reached.


 


Consist of a metallic frame having base plate of 5” x 5”; bearing a movable rod with cap at one end. The needles and plunger can be fixed centrally in to the rod by clamping screw. The movable rod carries an indicator which moves over a graduated scale attached to the frame. The scale is 40mm in length with the smallest division of 1mm. The dashpot facilitates the gentle lowering of the movable rod with needle.


 


Vicat needle apparatus with dashpot; is used for determining the normal consistency and setting times of cement and 'A' Class limes.


 


The time it takes for a cement to stiffen to a standard value after addition of water is commonly known as the set time. The test involves mixing cement with water and then measuring its resistance to penetration of a standard probe at varying intervals of time, until a certain value is reached.


 


Consist of a metallic frame having base plate of 5” x 5”; bearing a movable rod with cap at one end. The needles and plunger can be fixed centrally in to the rod by clamping screw. The movable rod carries an indicator which moves over a graduated scale attached to the frame. The scale is 40mm in length with the smallest division of 1mm. The dashpot facilitates the gentle lowering of the movable rod with needle.


 


The vicat mould can be in the form of frustum of a cone having 70 mm in dia at the base, 60 mm at the top and 40 mm high or split type. A non-porous base plate of glass is also provided. Complete with consistency plunger, initial and final setting needles. 

Read More...


Yes! I am interested


Business Type Manufacturer, Exporter, Supplier
Country of Origin India
Application Industrial,Distilling Use
Brand Name Rupson

Preferred Buyer From

Location Worldwide

Yes! I am interested





Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

WhatsApp Us